Oil-base Mud treatment Equipment
2018-01-29
Oil-base Mud Treatment Equipment Operating principles:
Oil-base mud cuttings enter the top hopper of vertical centrifuge and fall onto its internal separation area. The internal cone rotates at a high speed of 900RPM and generates a centrifugal force of 430G. For density difference between liquid and solids, mud is hurled out of surface of drilling cuttings and passes through screens, and solids are retained inside the screens. And then, liquid is discharged from the liquid outlet and dry solids are discharged from the bottom of equipment.
Oil-base Mud Treatment Equipment Features & Benefits:
-Efficient solid-liquid separation. Liquid content of treated solids is up to national and industrial standards.
-Effective recovery of treated liquid for recycling in drilling solids control system.
-Greatly reduce solid discharge volume, drilling fluid cost and waste management cost.
-Meet field operation requirements on zero discharge of drilling waste.
-Rotate at a high speed of 900RPM to generate a centrifugal force of 430G and effectively separate liquid from cuttings.
-Flights coated with wear-resistant material and metal screens for longer service life.
-Intelligent pulse jet control system effectively prevents screen blockage.
-Separate oil circuit lubricating and cooling system for simple and reliable operation.
-Integrated programmable control system for safe and convenient operation.
-Feed/discharge ports can be equipped with screw conveyors to facilitate drilling cuttings conveying and continuous equipment operation.
Treatment Effects of Vertical Centrifuge:
For oil-base and synthetic-base mud: water content of solids treated by the vertical centrifuge is below 6%.
For water-base mud: water content of solids treated by the vertical centrifuge is within 5%~8%.
Oil-base mud cuttings enter the top hopper of vertical centrifuge and fall onto its internal separation area. The internal cone rotates at a high speed of 900RPM and generates a centrifugal force of 430G. For density difference between liquid and solids, mud is hurled out of surface of drilling cuttings and passes through screens, and solids are retained inside the screens. And then, liquid is discharged from the liquid outlet and dry solids are discharged from the bottom of equipment.
Oil-base Mud Treatment Equipment Features & Benefits:
-Efficient solid-liquid separation. Liquid content of treated solids is up to national and industrial standards.
-Effective recovery of treated liquid for recycling in drilling solids control system.
-Greatly reduce solid discharge volume, drilling fluid cost and waste management cost.
-Meet field operation requirements on zero discharge of drilling waste.
-Rotate at a high speed of 900RPM to generate a centrifugal force of 430G and effectively separate liquid from cuttings.
-Flights coated with wear-resistant material and metal screens for longer service life.
-Intelligent pulse jet control system effectively prevents screen blockage.
-Separate oil circuit lubricating and cooling system for simple and reliable operation.
-Integrated programmable control system for safe and convenient operation.
-Feed/discharge ports can be equipped with screw conveyors to facilitate drilling cuttings conveying and continuous equipment operation.
Treatment Effects of Vertical Centrifuge:
For oil-base and synthetic-base mud: water content of solids treated by the vertical centrifuge is below 6%.
For water-base mud: water content of solids treated by the vertical centrifuge is within 5%~8%.
News
- 07-11Technical features of using KOSUN drilling waste mud treatment system
- 07-07Main equipment of solids control system in drilling
- 06-26Geothermal well mud treatment system manufacturer—KOSUN solid control
- 06-26The key to achieving mud zero discharge is on-site processing after solid-liquid separation
- 05-10Application Scenarios of KOSUN Drilling Waste Treatment Equipment
- 05-10Environmental protection new regulations require to achieve zero discharge of drilling waste
- 05-09KOSUN Solid-liquid Separation Equipment is used in the construction industry
- 04-19What are the main functions of the Mud Agitator during use?
- 04-15The Advantages of KOSUN's trenchless horizontal directional crossing mud recovery system
- 03-15Vacuum degasser is mainly divided into centrifugal degasser and jet degasser
