The Applications Of Cones Applied To Desander And Desilter

The desander and desilter are important parts of solids control system, and the hydrocyclone cones is the key component.

The desander cone and desilter cones all are also referred as hydrocyclone cones, cones are basically separate the solids from drilling fluids. The separation process is carried out by employing centrifugal forces. The Cones are made of high polyurethane,high iron cast iron and ceramic with optional steel inserts, which ensure consistent productivity.

Desander removes the abrasive solids from the drilling fluids which cannot be removed by shale shakers. Normally the solids diameter for desander to be separated would be 45~74μm, desander cones remove abrasive, coarse solid particles from 45microns to 74microns.Desilter hydrocyclone manufactured by high abrasion resistant polyurethane material, provides quite efficient solid control in oil well drilling operation through its extensive service life even under in very critical parameters.

Desilter cones remove fine sand and silt from 15microns to 45microns. According to requirements and treating capacity, the groups of cone into desilting and desander unit can be customized.

KOSUN is a professional manufacturer of solids control equipment, KOSUN supply all the parts of solids control system, including cones of desander and desilter.