KOSUN Shale Shaker VS KOSUN VC-1000 drying shaker

KOSUN shale shaker and KOSUN VC-1000 drying shaker are widely known as top solids control equipments. KOSUN is specialist on solids control in many industry such as oil and gas well drilling, HDD, civil industry, mining industry, etc. KOSUN VC-1000 drying shaker have much difference specifications, such as shaker screen, dimension, treating capacity. And these features results their different strength on various aspect.

KOSUN shale shaker can be said the best possible solids control that required what once seemed impossible, shale shaker can adapt as solids characteristics change. The ground-breaking design of the shale shaker allows operators to use linear motion while drilling top-hole sections where heavy, high-volume solids.

KOSUN VC-1000 drying shaker can be configured to be used as standard rig shakers and are easily transported. The standard skids includes lifting lugs at all four corners and fork truck guides. There are optional bolt-on underflow hoppers, in both standard and low profile heights. The standard feed trough can be changed to a conventional top or weir feeder. This allows one shaker to be used as either drying shaker or a rig shaker, making it one of the most versatile shakers on the market.

KOSUN shale shaker was engineered to operate in both the capacity and efficiency modes of operation.est results from the well confirmed the superior performance of the KOSUN shaker. To maintain comparative control, both shakers were installed with the same parameters: deck angle (0°), screen mesh (API 140), and fluid pond coverage (75% screen coverage). During the 8 1/2 in. section at a depth of 3,300 ft (1,006 m) with an ROP of 100 ft/hr (30.4 m/hr), the KOSUN shaker processed a maximum flow rate of 410 GPM, or 70% of the overall circulating flow rate. Meanwhile, the control shaker processed a maximum flow rate of 293 GPM, amounting to only 50% of the overall circulating rate. Compared to the control shaker, the shaker, while running in the efficiency mode, averaged an overall 28% increase in maximum flow rate, but 20% on the well volume.

VC-1000 drying shale shakers offer many features of the LS703 series shakers but at a lower cost. Powered by two KOSUN Super G vibrating motors, the LS703 is a 3-panel machine that operates at 7.0 Gs (Super G2 motors are available as an option). Processing rates vary from 560 GPM of a 17.8 PPG fluid using DX-A140* screens on an VC-1000. The available screening area per API RP 13C for the VC-1000 is 24.9 square foot with the pyramid screen and 34.5 square foot with the pyramid plus screen.

In short, KOSUN shaker VS KOSUN VC-1000 shaker both have done rather well. The advanced specification of KOSUN shaker is it can be switched as linear motion shale shaker and balanced elliptical motion shale shaker according to actual drilling fluids condition. While KOSUN VC-1000 will give you convenient maintenance and more economical cost.