What is the features of mud cleaner

The weighted mud flows to the inlet head section of the desander and/or desilter entering the hydrocyclones for separation of particles. Mud leaving the underflow is further screened with fine mesh to separate larger particles allowing only barite size particles to pass through the screen returning and recovering then the clean mud.

The purpose of the mud cleaner is to remove drilled solids larger than barite. Solids larger than 74-105 micrometres can be removed by the mud cleaner before the viscosity builds up. Mud cleaner can effectively control weighteddrilling fluid solid content. Prevent differential pressure sticking, adhesion stuck drill accident, reduce the drill string and the filter cake thichness on bond issues.

Mud Cleaner Features

1. Polyurethane (PU) Material for desander and desilter cones.

2. Desander cones can be installed between one and three 10”desandercones, each cone can process 500GPM and makes a separation between 40 and 100 microns

3. Desilter cones can be installed between eight and twenty 4”or 5”desiltercones ,each cone can process 80 GPM, and makes a separation between 15 and 75 microns

4. Mechanical Deck Adjustable while operation for reliable performance

5. Compact design with small footprint, with top feed and wire feed two option.

6. Hook-strip shaker screen for fast screens changing with PWP and PMD screens

KOSUN QZS series high effective mud cleaner is the second or third stage separation equipment of drilling liquid, which will deal with the mud after being treated by the first grade separation equipment. The barite will be recovered and cuttings which are bigger than barite will be removed. Then the barite in the underflow will flow into circulation tanks through the screens when the weighted mud passes while the particles that are bigger than mesh will be removed.