KOSUN DC drilling decanter centrifuges have the important features

The decanter centrifuge is used to separate the solids from volumes of liquid that contain solid particles. This may be a process stream or a waste product from a process.

This separation effect occurs in just the same way as it would in a settling tank but in the case of the oilfield decanter centrifuge the tank is in the form of a stainless steel bowl that is spun at high speed. This increases gravity from a factor of one as in nature, up to three thousand in some cases. The settled solids accumulate at the bowl wall and are then discharged by means of a helicoidally shaped screw known as a scroll, which pushes the solids from the cylindrical section of the bowl, up through the conical section and towards the discharge ports. The liquid phase, known as the centrate, finds its way back down the drilling fluids decanter centrifuge bowl where it flows out over a “weir plate”, as it would in a lagoon, and falling by gravity down the discharge pipe.

KOSUN DC drilling decanter centrifuges have the following important features:

1. Replaceable liners at points in contact with solids for easy servicing on site

2. Unique dual angle conical section which increases scroll life

3. Low weight rotating assembly due to use of Duplex Steel and its high tensile strength

4. Low power consumption

5. Automatic, hydraulic scroll drive system so no gearbox required, this has a high torque capability and is also independent of the main drive. This means any residual solids in the bowl are discharged before the bowl is started.

6. Quality assured manufacture

7. Patented polyurethane scroll

8. Options for tiled wear protection

9. Polymer concrete base-frame now increasingly available for some models which offers greatly reduced noise levels, high stability and is totally resistant to corrosion.

The process of separating the liquid from the solid matter is sometimes called dewatering. In waste streams decanting centrifuges are used to minimise the amount of liquid that is being hauled away, and produce solids suitable for disposal to landfill sites, land spreading or even incineration. In certain processes chemical flocculants may be added to aid the process of separation.