The common problems of oilfield drilling desilter
2014-02-14
Oilfield drilling desilter is the third stage of oilfield solids control equipment. In oilfield solids control system,the solids with diameter ranging from 15 to 44 μm are to be separated from the rest,which will go through further processing.The Oilfield drilling desilter is the third stage equipment in the whole drilling mud system, at the same time, it is an important device, too. Let’s see some common problems and solutions for that .
Common Problems
(1) Repeated plugging of Apex in all cones.
(2) One or more cones plugging while others are working normally.
(3) Cones are loosing whole mud in stream.
(4) Solids content in cone overflow continues to increase over time.
(5) The underflow discharge is very dry.
(6) Hydrocyclones leak between the cone nut and body, but no fluid is coming out of the bottom.
Possible Cause
(1) Too small of underflow opening.
(2) Plugged at feed inlet or outlet.
(3) Backflow from overflow manifold, or centrifugal pump impeller worn out or too small,
(4) Drilling through hydratable clays will cause increased viscosity.
(5) Strong vacuum in manifold discharge line.
(6) The apex cone nut is tightened too much which does not allow fluid or solids to exit the hydrocyclones.
About KOSUN
KOSUN is a professional solids control equipment manufacturer in China, which establishment in 1992.KOSUN can supply shale shaker,vacuum degasser,mud cleaner, desilter,desander,decanter centrifuge,centrifugal pump, screw pump,mud tank,jet mud mixer, diesel tank, shear pump,mud agitator,mud gun,water tank,etc KOSUN has directly exported its products to the following regions: All-Russia Region, including Russia, Kazakhstan, Uzbekistan, Azerbaijan, Ukraine, Turkmenistan, Kyrgyzstan,Tajikistan, etc.; East Asia and South Asia, including Pakistan, India, Indonesia, Thailand, Burma, Malaysia, etc.; the Middle East and North Africa, including the United Arab Emirates, Kuwait, Egypt, Algeria, Libya, Sudan, etc.; America, including the United States, Canada, Mexico, Brazil, Columbia, Venezuela, etc.; Australia; Germany in Europe.
News
- 07-11Technical features of using KOSUN drilling waste mud treatment system
- 07-07Main equipment of solids control system in drilling
- 06-26Geothermal well mud treatment system manufacturer—KOSUN solid control
- 06-26The key to achieving mud zero discharge is on-site processing after solid-liquid separation
- 05-10Application Scenarios of KOSUN Drilling Waste Treatment Equipment
- 05-10Environmental protection new regulations require to achieve zero discharge of drilling waste
- 05-09KOSUN Solid-liquid Separation Equipment is used in the construction industry
- 04-19What are the main functions of the Mud Agitator during use?
- 04-15The Advantages of KOSUN's trenchless horizontal directional crossing mud recovery system
- 03-15Vacuum degasser is mainly divided into centrifugal degasser and jet degasser